Quatech WLNG-ET-DP500 Series Uživatelský manuál stáhnout pdf (Strana 54)

Company Confidential Quatech, Inc.

54 Airborne CLI Reference Manual 100-8081-100

get-cfg

Command

get-cfg

Arguments

[ASCII Text – filename]

Device Type

All

Default

[blank]

Description

Will cause the device server to retrieve a configuration file from the FTP server identified in the

parameters defined by the following commands:

ftp-server-path

ftp-server-address

ftp-user

ftp-password

Once the download is complete it is necessary for the save command to be issued, this will cause the

configuration file to be stored to the device server.

There are two valid configuration files that may be down loaded:

user_cfg.txt

User configuration file. This file contains the user configuration commands and

parameters.

OEM_cfg.txt

OEM default configuration file. This contains the OEM default settings for the

device server. These settings are installed upon the issuing of a factory reset

command or hardware factory reset input.

For the Serial/UART/SPI device servers it is required that the device is associated and authenticated with

a network and has a valid IP address before issuing this command.

The Ethernet Bridge server supports the use of this command over the wired interface.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 119 120

Žádné komentáře

Quatech WLNG-ET-DP500 Series Uživatelský manuál Strana 54