Quatech AirborneDirect ABDG-ET Series Uživatelská příručka stáhnout pdf (Strana 5)

AirborneDirect™ Serial Device Server Quick Start Guide Quatech, Inc.

100-8107-110 5 February 2011

Step

Description

Select Discovery OEM Device Name

This parameter allows you to name the device uniquely or group into a

functional set. When device discovery is used this name identifies the

found device.

If you wanted to uniquely identify the device you could mark it with a

label e.g. Dev1, and then enter Dev1 in this field. When the device is

found it will identify itself as Dev1.

Alternately you could indicate the type of equipment the device is

attached to e.g. Haas TL-2 (CNC Turning Center), by giving the unit a

name like Haas_TL_2. When discovered you can then identify the device

you are accessing.

Enter the text string is you wish to change the default value. This field is

optional.

Select Radio Startup Mode

Select On from the drop down menu for the radio to operate.

Select Wireless LAN Connection Type

If you are using Access Points make sure this is set to Infrastructure

from the drop down menu.

If you want to use AdHoc set this accordingly. Additional settings may be

required to fully configure for AdHoc mode, these are covered in the User

Manual for the device.

Select SSID

Enter the name of the wireless network you wish to access. This field is

case sensitive.

Select Wireless LAN Security Type

Select the security type the wireless network you wish to access is using.

Depending upon the option you choose you may have to enter additional

information. Once you have selected the security type the required inputs

will be made accessible by un-graying the fields that must be completed.

If the security type is not in the available selections, more are available in

the

WLAN Security Settings

page. If you choose to use this page make

sure you commit the changes you have already made before moving to

the

WLAN Security Settings

page.

Select WLAN DHCP

If your WLAN network uses DHCP to assign IP addresses to the wireless

clients, select Enabled from the drop down menu.

If you are using static IP addresses select disabled from the drop down

menu. WLAN Static IP and WLAN Subnet Mask will need to be

entered.

Select Ethernet DHCP

If the Ethernet network connected to the Ethernet port uses DHCP to

assign IP addresses to the wired clients, you should select Enabled from

the drop down menu.

If you are using static IP addresses you should select Disabled from the

drop down menu. Ethernet Static IP and Ethernet Subnet Mask will

need to be entered.

Important: This field is only used if the Ethernet interface is set as a

client (default for Serial devices). If set as a router the field is ignored.

See the User’s Manual for a full description of configuring the unit as an

Ethernet router.

Select WLAN Static IP

This field defines the static IP address for the wireless interface.

This address is only used if the WLAN DHCP is disabled or DHCP failed.

Default: 192.168.10.1

Select WLAN Subnet Mask

This field defines the subnet mask used by the wireless interface.

This mask is only used if the WLAN DHCP is disabled or DHCP failed.

Default: 255.255.255.0

Select Ethernet Static IP

This field defines the static IP address for the Ethernet interface. When

configured as a serial device server (Ethernet interface is in client mode)

this address is only used if the Ethernet DHCP is disabled or DHCP

failed.

Default: 192.168.2.100

Select Ethernet Subnet Mask

This field defines the subnet mask used by the Ethernet interface. When

configured as a serial device server (Ethernet interface is in client mode)

this mask is only used if the Ethernet DHCP is disabled or DHCP failed.

Default: 255.255.255.0

Press Commit [Button]

Saves changes to the device.

1 2 3 4 5 6 7 8 9

Komentáře k této Příručce

Žádné komentáře

Quatech AirborneDirect ABDG-ET Series Uživatelská příručka Strana 5

Komentáře k této Příručce

Související produkty a manuály pro Sítě Quatech AirborneDirect ABDG-ET Series