Quatech Audio/Video Capture USB 2.0 Specifikace stáhnout pdf (Strana 334)

13-16 z.one ultra and z.one ultra sp OPERATOR MANUAL

ICMP Echo: xx.xx.xx.xx timed out [xx.xx.xx.xx is the IP address of

the configured device].

b. Select Verify.

 If a DICOM-level connection has been made, the following message

appears:

Verification of communication succeeded

 If a connection has not been made, the message Connection failure

displays. If so, repeat this procedure from Step 1 or contact your

network/

PACS administrator.

7. To enable the Destination, go to the DICOM MPPS Administration screen

(

Figure 13-13), select the Destination and click Enable

8. To exit, press Enter (Enter/Select for SmartCart sp) or Freeze.

DICOM Worklist

If a DICOM Worklist application is installed on the network, a list of scheduled

exams can be delivered to the ZONARE ultrasound system on demand. One or

more worklists can be configured, but only one can be designated as the active

worklist at any given time. The worklist can be configured to specify a date range

and other criteria.

 To Configure DICOM Worklist

1. Make sure the System has a live Ethernet connection to the target DICOM

devices (

Figure 13-7).

NOTE: DICOM parameters can be configured while disconnected from the

Ethernet connection, but testing will not be possible.

Table 13-5. DICOM MPPS Destination Parameters

Parameter Description

Nickname

e.g., MPPS Server

Informal name to identify the device to users in

the department. This name is typically

assigned in the department.

Application Title

e.g., MPPS_1

Name assigned to the target DICOM MPPS

Server device by the PACS Admin to identify it

on the DICOM network.

IP Address TCP/IP network IP address assigned by the IT

Admin, to the target DICOM MPPS Server

device.

Port Number TCP/IP port number assigned by the PACS

Admin, for use by the DICOM MPPS Server

device. Default port value is 104.

Max PDU Receive/Send Size Size (in bytes) of the basic data packets (PDU)

that will be transferred during receive and

transmit operations (default is 16384 = 16K).

1 2 ... 329 330 331 332 333 334 335 336 337 338 339 ... 403 404

Komentáře k této Příručce

Žádné komentáře

Quatech Audio/Video Capture USB 2.0 Specifikace Strana 334

Komentáře k této Příručce