Quatech Audio/Video Capture USB 2.0 Specifikace stáhnout pdf (Strana 66)

100

101

4-6 z.one ultra and z.one ultra sp OPERATOR MANUAL

Figure 4-5. Scan Engine Onscreen Battery Charge Icon

2. Four battery charge LEDs on the front panel of the Scan Engine (see

Figure 4-4) indicate the % of charge remaining as follows:

• 4 LEDs illuminated: >75% of charge remains

• 3 LEDs illuminated: 50–74% of charge remains

• 2 LEDs illuminated: 25–49% of charge remains

• 1 LED illuminated: <25% of charge remains

NOTE: The battery charge LEDs remain illuminated for approximately 10 seconds

after the ultrasound system is powered

ON. After 10 seconds, they turn off.

Another method for checking the amount of charge left on the battery is to fully

remove the battery from the

Scan Engine:

• Press the test button located on the back side of the battery.

• The number of LEDs that light up indicate % of charge remaining just as the

LEDs on the

Scan Engine front panel do (see above).

Scan Engine

Battery

Operating

Range

Table 4-1. Battery Operating Range

Battery Charge

Status Icon

Usage Duration

Active use ~ 30 – 40 minutes (depending on modes and

display brightness)

Sleep when idle (Standby

mode)

~ 1 hour

Storage mode (in Scan

Engine

)

~ 3 weeks

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 403 404

Komentáře k této Příručce

Žádné komentáře

Quatech Audio/Video Capture USB 2.0 Specifikace Strana 66

Komentáře k této Příručce